FORD 6.0 FICM Repair Vancouver Canada
It is only a matter of time until the FICM on your 6.0 powerstroke equipped service trucks will fail. I know which components are prone to failure in the FICM and can replace the weak parts with upgraded parts before they fail.
This is a repair service for your Ford Super Duty fuel
injection control module for a no start / rough start condition or the P0611 error code. This fault can also trigger low voltage on the injectors causing the codes: P0261, P0264, P0267, P0270, P0273, P0276, P0279 & P0282.
I repair and upgrade the root cause of the failure. The benefit of this repair service is not only saving hundreds of dollars, but also there is no need to reprogram your FICM. Just bolt it back on and you're back in business. One day turn around time, no need to ship it to the US for repair or pay $700+ to get from the dealership.
Rebuilding your module will upgrade the circuitry so that it will never fail again vs. replacement with a used or brand new module that will only have the same problem in the future. It also alleviates the need to have FORD reprogram the new module. Reprogramming is not needed if it goes back in the original vehicle. If it is not the one that came out of your vehicle then it will require programming at FORD (which will cost about $120.00.) Our repair comes with a 5yr Warranty. The dealer's new module does not.
We do not offer voltage upgrades, the Powerstroke FICM is already subjected to excessive heat and vibration. Upgrades increase heat and will degrade the internal circuits. This upgrade is for short term performance applications.
FICM Repair Service is for the following:
2003 - 2007 FORD F-250 6.0L SD Truck
2003 - 2007 FORD F-350 6.0L SD Truck
2003 FORD F-450 6.0L SD Truck
2003 FORD F-550 6.0L SD Truck
2003 - 2005 FORD Excursion 6.0L SUV
2003 - 2009 FORD Econoline 6.0L VAN
|Last hour||Last 24 hours||All|